50kW in Parallel

Here is the guide on how to connect 50kW Hybrid Inverters with Batteries in Parallel.

First note - Each 50kW Inverter MUST have it's own HV Battery pack, unlike cases of other hybrid inverter with LV battery, HV battery can only be connected separately to HV hybrid inverters. For example, Inverter 1 must have a battery rack connected into BMS 1, then the Second Inverter has a separate Battery rack into that inverters BMS 1.

Second note - The maximum number of Inverters in parallel is 10.

Third note - Please set dip switches on for master and when more than 2 inverters all dip switches on.

Please refer to the Manual on installing the 50kW unit along with the Battery rack.

Step 1 - Once you have the inverter connected to the Battery, AC and PV, we will need to link up the 50kW Inverters using a patch cable that goes from the Master inverter, to the second Inverter and so on... 

Step 2 - Each Inverter must have it's separate battery rack connected. (see below)

Step 3 - Turn on all inverters, go to the settings page, select Advance settings. According to the Inverter please set the following parameters onto the respective Inverters.

Now the system should be up and running in parallel - If you have any issue please contact us.