Why Solar Panels Aren't Reaching Kilowatt-Peak (kWp)

Created by Jack Murphy, Modified on Thu, 7 Aug at 1:36 PM by Jack Murphy

What is Kilowatt-Peak?

Used to measure or describe the maximum theoretical output of a solar panel or solar array under standard test conditions (STC) and is typically used as a benchmark to compare size/power of arrays. In reality it is almost impossible to reach this figure as there are many factors which do not meet the STCs when a system is installed on site.


Standard test conditions are based upon

  1. 25°C ambient temperature
  2. 1000 W/m² irradiance
  3. 1.5 sea level air mass (AM) spectral distribution (i.e. the distribution of wavelength and light intensity caused by the amount of atmosphere that the sunlight passes through reach the panels)



Factors Which Contribute to Performance Reduction from kWp


Temperature

  • Cell temperature will fluctuate throughout the day
  • Efficiency of solar panels decreases as the temperature rises due to increased resistance
  • Stronger/colder winds will dissipate the heat more effectively 


Intensity of light

  • Tilt of panels may not be optimal on roof-mounted arrays for direct sunlight
  • Even during sunny weather there will be intermittent cloud coverage which reduces intensity of light hitting the panels
  • Dirt on the panels will reduce the amount of light reaching the cells until they are cleaned by rainfall


Shading Factor (SF)

  • Many popular design software packages provide the kWp but also provide another value in the performance estimate which is amended based on SF, giving a more realistic performance estimate when the panels will be shaded by trees, buildings etc.


Design Software

  • Many popular design software packages will take things such as geographical location into account when calculating kWp, but some may purely use the values from the manufacturer specifications


Deterioration

  • Panels reduce in efficiency by roughly 1% per year they are in use


Inverter Power Loss

  • There is some power loss as the inverter works to convert the DC power into AC
  • Most modern inverters have an efficiency of over 95% but not possible to reach 100% efficiency









Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article