Battery suddenly drops to 0% SOC

Created by Lee Dobson, Modified on Sat, 7 Oct, 2023 at 2:11 PM by Lee Dobson

What to do.


Check the Li-BMS page to confirm if the BMS is communicating still with the inverter, if it is not communicating.

please restart the system (including batteries and inverter) without making any change to the system.

Do not unplug the communication cable, just restart the battery and the inverter.

If battery can communicate to the inverter again without any change, this is a software issue, please contact inverter engineer to update firmware to the latest version.

If battery can not communicate to the inverter, then please unplug these cable and restart again, if this works, that means something wrong with cables. Please tighten cables again.

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article