Viewing L5.1, L5.3 and G5.3 Sunsynk Battery Data on Mobile App

Created by John Jackson, Modified on Tue, 6 Feb at 4:09 PM by John Jackson

Pre-requisite – Before being able to view this Battery Data, your Datalogger must be upgraded to latest software revision 4790123B24R

 

 

When IP65 Batteries have been updated to software revision 0x100B (100B) you can see this on the mobile app, plus their individual SOC % value plus other data.

 

From your Plant(s) select the Plant to see Overview screen. At the bottom of the screen select Equipment, then at the top of the screen select Battery. Here you will see s/n of host Inverter.

 

Tap the drop down arrow on the right and here you will see the serial numbers of the IP65 L5.1 and L5.3 plus G5.3 Batteries in the Plant and their respective individual SOC % value.

 

To see individual data for each Battery simply tap the serial number you want to view. What is important here is the ability from your App to view the individual SOC % value for each Battery. This enables you to determine if their SOC’s have become out of sync by not being charged regularly to 100% and so consider setting an overnight Grid Charge using your Timer Settings.

 

 

 

Please Note – This new feature is only available for the IP65 L5.1 and L5.3 plus G5.3 Models of Sunsynk Batteries and is not applicable for other Models of Sunsynk or any 3rd party Batteries.

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article